跳到主内容
Ciallo
Back to games & experiments

浮力 · 阿基米德原理

物块浸入液体,测力计读数随排水量变化。

F浮 = ρgV排浮沉entries件

Try the experience, then read the guide. Pausing keeps your state; resetting clears the current session and parameters.

Try a different scene

Loading a preset restarts the experiment and applies its parameters. You can fine-tune them afterwards.

Preparing the experience…

UNDERSTAND EVERY MOVE

浮力 · 阿基米德原理 · Detailed guide

Comparison物块与液体密度,观察上浮、悬浮和下沉。浮力取决于排开液体的体积与液体密度;物体是否漂浮则需要把浮力和自身重力放在1起判断。

Getting started

  1. 01载入漂浮场景,观察物块露出液面的部分。
  2. 02将物块密度调到与液体相等,观察受力。
  3. 03继续提高物块密度,Comparison完全浸没后的浮力和重力。

Controls & parameters

  • 物块密度ρ物与液体密度ρ液单位kg/m³。
  • 体积V单位m³,质量由ρ物V决定。
  • 区分总体积与浸入体积:漂浮时只有水下部分排开液体。

F浮 = ρ液gV排

阿基米德原理使用排开液体的体积V排。物块完全浸没时V排等于物块体积;漂浮时V排小于总体积,直到浮力与重力相等。不能把漂浮物的总体积直接代入排水体积。

密度判断浮沉

均匀物块在同1液体中,ρ物小于ρ液时能部分浸入并漂浮;两者相等时,完全浸没的浮力与重力相等;ρ物更大时,完全浸没的最大浮力仍小于重力,物块下沉。

Strategies & observations
  • Comparison密度时先保持体积不变,避免同时改变质量与排液体积。
  • 漂浮时,浸入比例about为ρ物/ρ液。
  • 触底后地面支持力也参与受力,不能再说只有重力和浮力。
Common misconceptions
  • 体积更大不自动代表更容易沉,密度Comparison仍是关键。
  • 漂浮时V排不等于物块总体积。

Put your understanding into practice

completed0 / 3

Follow the steps, compare the expected results, and mark the challenge complete yourself. This records your practice without judging your results.

CHALLENGE 01

半体积浸入

  1. 载入物块500、液体1000kg/m³场景。
  2. 观察水下比例。

Expected result: about1半体积浸入液体。

CHALLENGE 02

等密度

  1. 把两种密度都设为1000。
  2. Explore重力与浮力。

Expected result: 完全浸没时两者大小相等。

CHALLENGE 03

体积翻倍

  1. 保持两种密度相同。
  2. 把体积由0.003调到0.006m³。

Expected result: 重力与完全浸没浮力均翻倍,浮沉Type不变。

Explore similar experiences

Contact Ender

Say hello, discuss a commission, or send a little kindness. Here's where to find me.

© 2026 Ender · Cat Garden