跳到主内容
Ciallo
Back to games & experiments

杠杆平衡entries件

左右各挂1个重物,调力与力臂找平衡。

F₁L₁ = F₂L₂力臂

Try the experience, then read the guide. Pausing keeps your state; resetting clears the current session and parameters.

Try a different scene

Loading a preset restarts the experiment and applies its parameters. You can fine-tune them afterwards.

Preparing the experience…

UNDERSTAND EVERY MOVE

杠杆平衡entries件 · Detailed guide

调整两侧的力与力臂,理解杠杆为什么会平衡或转向。力大的1侧不1定占优势,还要看它离支点多远。让力与力臂乘积可Comparison,比凭图上物体大小猜测更可靠。

Getting started

  1. 01先设置两侧相同的力与力臂,观察平衡。
  2. 02只增加1侧力臂,观察转向与力矩变化。
  3. 03通过调小这1侧的力,重新恢复平衡。

Controls & parameters

  • F₁、F₂表示两侧向下的力,单位N。
  • L₁、L₂是相应力的垂直力臂,单位m。
  • 判断方向时看两侧F×L;图形倾斜用于示意趋势,并非真实杆的完整动态过程。

F₁L₁ = F₂L₂

理想杠杆在两侧力矩大小相等、方向相反时平衡。相同力下,力臂较长的1侧力矩更大;相同力矩下,力臂越长,所需力越小。

力臂不是随便1段长度

严格定义中,力臂是支点到力作用线的垂直距离。本Experiment用两侧垂直作用力和标注长度帮助理解;若真实情况下改变施力方向,应重新判断垂直距离,不能直接拿杆长替代。

Strategies & observations
  • 用20N×1m与10N×2m先建立相同力矩的直觉。
  • 改变1items后先预测转向,再看Experiment反馈。
  • 记录每侧乘积,避免4个滑块1起乱调而失去因果。
Common misconceptions
  • 力大不等于力矩大,还要看力臂。
  • 图中倾斜幅度是示意反馈,不用它测量真实角加Speed。

Put your understanding into practice

completed0 / 3

Follow the steps, compare the expected results, and mark the challenge complete yourself. This records your practice without judging your results.

CHALLENGE 01

大小力也能平衡

  1. 载入省力对照。
  2. 核对两侧力矩。

Expected result: 20×1与10×2相等,杠杆平衡。

CHALLENGE 02

只改力臂

  1. 从平衡状态Start。
  2. 把左侧力臂增加about1倍。

Expected result: 左侧力矩变大,示意杆向相应方向偏转。

CHALLENGE 03

反算未知力

  1. 给定1侧20N、1.5m,另1侧力臂1m。
  2. 算出需要的力再设置。

Expected result: 另1侧30N时恢复平衡。

Explore similar experiences

Contact Ender

Say hello, discuss a commission, or send a little kindness. Here's where to find me.

© 2026 Ender · Cat Garden